EASY QUICK
CLEAR VALVE
Important: Extinguish all smoking materials prior
to use of Easy Quick Clear Valve. Do not stand directly
behind the Quick Clear cartridge during operation.
Use of PROTECTIVE eyewear is recommended.
Quick Clear is recommended for regular maintenance to
remove built-up contaminants.
Recommended for use at every tank change. Also recommended
for use before seasonal storage to avoid build up of contaminants
during the off-season. Instructions for “Easy Quick Clear Valve”
maintenance procedure shall be provided on a label attached to
trap where easily visible by user.
The Easy Quick Clear Valve is a threaded knob located on the
back of your trap. It should be used with the adapter included
with your trap, and a threaded Quick Clear cartridge available on
our website at: www.mosquitomagnet.com or at your local
hardware or home improvement store.
1.
IImmppoorrttaanntt:: SShhuutt ddoowwnn yyoouurr ttrraapp.. LLeett ffaann rruunn uunnttiill iitt ssttooppss..
(About 5 minutes.)
2. Close the propane tank valve by turning to the “OFF”
position. (Turn the tank valve clockwise.)
3. Remove the protective cap from Easy Quick Clear valve
located in the back of the trap.
4. Hand-screw the Quick Clear adapter on to Quick Clear
valve, until finger tight.
5. Hand-screw the Quick Clear cartridge into the Quick Clear
adapter clockwise until hand tight while holding the
adapter in place. Important: Do not over-tighten.
6. While holding the adapter in place slowly unscrew
Quick Clear cartridge up to 1/4 turn only in counter
clockwise direction from the Quick Clear adapter only. The
strong flow of compressed air lasts approximately 45
seconds. Be sure to allow Quick Clear cartridge to run out
completely. (Hissing will stop when cylinder is empty. Quick
Clear cartridge will be cold to the touch.)
7. Unscrew the Quick Clear cartridge to remove. Discard empty
Quick Clear cartridge after use; it is not reusable or refillable.
8. Unscrew the Quick Clear adapter to remove.
Use caution when r
emoving Quick Clear adapter and
cartridge, as some compressed air may come out at this time.
Remember to keep the Quick Clear adapter for future use.
9. Replace Easy Quick Clear Valve protective cap, and
proceed with normal start up of your trap. If use of Easy
Quick Clear valve feature does not resolve starting trouble,
contact Customer Care
1-800-953-5737.
Unscrew the Quick Clear cartridge first, then
unscrew Quick Clear adapter and discard the
spent Quick Clear cartridge. Remember to keep
the Quick Clear adapter for future use.
To start cleaning process, while holding Quick
Clear Adapter in place, unscrew the Quick
Clear cartridge
1/4 Turn Only.
While holding the adapter in place, screw the
Quick Clear cartridge into Quick Clear adapter.
F
irst hand-screw the Quick Clear adapter onto
the valve.
Step 4
Step 5
Step 6
Step 7
432-036 Rev. E
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals