Mosquito Magnet Liberty Owner's Manual download pdf (Page 6)

ASSEMBLY/STARTING INSTRUCTIONS

Place standard 20 lb. pro-

pane tank (not included) into

round cradle hole in base.

Clip tether from bottom of

Liberty around tank handle.

Tighten securely making sure

not to dislodge tank from

cradle position.

Making sure propane tank is fully

closed, attach propane regulator

hose to propane tank. Secure tightly

by hand. Do not use tools. (

Products

which bear the UL mark are intended for

use with LP provided in North America).

Turn propane on by slowly turning

counterclockwise. Take care not to

turn too quickly to avoid engagement

of safety check valve in regulator.

Plug power connector into

Liberty unit located on back-

side of unit.

Plug adaptor into properly

grounded electrical outlet. This

adaptor is not intended to be

mounted. For UL listed trap, use

120VAC adapter. For CE marked

trap, use 230VAC adapter.

Unlatch net door by turning

clockwise.

Carefully open net door.

Take net and hold with string of

net facing door. Make sure net

entrance is fully open and that

drawstring is not pulled at all,

causing the entrance to be

partially blocked.

Align bottom of net guide over

top of black slotted collar. Slide

net over collar. You will hear a

click when net is secured.

Close door and lock turning

latch counter-clockwise. Trap

will not maintain catch properly

if net is not inserted correctly.

Using handle on front of Liberty,

move your trap to desired

location in yard. See “Trap

Placement Instructions”.

Attach back of net onto tab

provided inside of net housing.

Place excess length of string

towards door to avoid string

getting drawn into fan.

CAUTION: Do not move

trap with tank attached

Peel cover from attractant

cartridge. Using a coin,

unscrew cover from attrac-

tant compartment inside of

tube.

Slide attractant cartridge into

compartment. Recap and

secure tightly.

ASSEMBLY/STARTING INSTRUCTIONS

TRAP PLACEMENT INSTRUCTIONS

Determine the direction of the prevailing wind.

For more information, refer to trap placement section of our website at www.mosquitomagnet.com

Trap must be placed on level ground to avoid tipping or uneven propane distribution.

Make sure unit is not directly up against a blockade such as a building or fence.

Do not place trap directly above water source (sprinklers, hose, etc.).

It is recommended that the trap be placed in the shade.

Stand in the center of the area you are trying to protect and look toward the prevailing wind. Proper placement

of the Mosquito Magnet will be 30-40 feet in front of you, within 5-6 feet of ground cover (i.e., bushes,

flowerbeds, treeline, marshbed, etc.)

1 2 3 4 5 6 7 8 9

Comments to this Manuals

No comments

Mosquito Magnet Liberty Owner's Manual Page 6

Comments to this Manuals

Related products and manuals for Garden tools Mosquito Magnet Liberty